手机壳打印机该怎么解决拉丝问题

2019-04-01 09:20:46

手机壳打印机最怕出现什么问题呢?可能大家的答案都会不一样,但小编觉得呢,手机壳打印最怕出问题的地方就是喷头!特别是喷头拉丝。(英:Mobile phone case printer most afraid of what problem? The answer may not be the same, but small make up think, mobile phone printing most afraid of a problem is the nozzle! Especially nozzle drawing.)

手机壳打印机的喷头喷口被墨水堵塞。(英:The nozzle of the mobile case printer is clogged with ink.)


这是手机壳打印机在印刷过程中经常遇到的问题。手机壳印刷机是点阵印刷,由一定密度的点(DPI)组成。因此,如果喷嘴中的任何孔被堵塞,则不会产生电缆。这通常被称为拉丝,可以分析它有两个原因(英:This is the problem that mobile case printer often encounters in printing process. Mobile case printing machine is dot matrix printing, which is composed of a certain density of dots (DPI). Therefore, if any holes in the nozzle are plugged, no cables will be generated. This is often called wiredrawing and can be analyzed for two reasons:):

原因一:这是机器质量的原因。一台好机器必须经过战场测试。我们经常说可以买到的东西毫无价值。真正的价值是无形的东西,比如经验,技术。降水,这些无形的东西恰恰是一些大型厂家用多年的钱交换,结果是机器成熟,稳定,耐用,具有故障率并能继续工作。(英:Reason 1: this is the quality of the machine. A good machine must undergo battlefield testing. We often say that things we can buy are worthless. Real value is intangible things like experience, technology. Precipitation, these invisible things are just some large manufacturers with years of money exchange, the result is that the machine is mature, stable, durable, with a failure rate and can continue to work.)

手机壳打印机


原因2:墨水的原因非常重要。现在,市场上同类型喷嘴的墨水对于一些制造商是800元,对于一些制造商是1000元,对于一些制造商是1500元,对于进口机器是甚至数千种墨水。它是便宜低价厂家销售良心,为客户着想一个心脏,是代价高昂的胜利油墨制造商,所谓一分钱,产品,毕竟,安宁和简单许多客户仍丢失账户,廉价图像便宜,廉价墨水的成分简单,生产过程简单,后续加工简单,最终结果是墨水的化学成分不合格,杂质墨水不会完全过滤,也不需要时间。存在咬嘴堵塞的情况。(英:Reason 2: the reason for the ink is very important. Now, the same type of nozzle ink on the market is 800 yuan for some manufacturers, 1,000 yuan for some manufacturers, 1,500 yuan for some manufacturers, and even thousands of inks for imported machines. It is cheap price sell conscience, for the customer to a heart, is a costly victory ink manufacturers, the so-called penny, products, after all, peace and simple, many customers are still missing account images cheap cheap, cheap ink composition is simple, simple production process, the subsequent processing is simple, the chemical composition of the end result is that the ink is unqualified, not completely filtering impurities ink and do not need time. There is a blockage of the bite.)


所谓的倾斜喷射是可以拉出墨点,但不喷射到应该喷射的位置。以这种方式,在喷涂的地方出现白线,并且旁边出现较暗的线条。(英:The so-called oblique jet is able to pull out the ink point, but do not spray to the injection should be. In this way, white lines appear where the paint is applied and darker lines appear next to it.)

原因一:机器的维护问题,这个环节可能同时造成斜喷。环境非常重要。它必须干净有序。它不应与其他机器混合使用。进入办公室和吹空调时,温度应适中,不要太高或太低。(英:Reason 1: machine maintenance problems, this link may also cause oblique spray. The environment is very important. It must be clean and orderly. It should not be mixed with other machines. When entering the office and blowing air conditioning, the temperature should be moderate, not too high or too low.)


原因2:使用频率,这也很重要,机器会和人一样长,而且需要花很多时间休息,从疲劳中恢复并重新投入最佳状态,所以结果是机械变形,影响机器的整体性能,所以最好的是机器通常工作约3小时,停机半小时,让机器的不同部位冷却下来,加入燃料,润滑剂和类似的。(英:Reason 2: using frequency, it is very important also, the machine can be as long and people, and need to spend a lot of time to rest and recover from fatigue and back into the best condition, so the result is the mechanical deformation, affect the overall performance of the machine, so the best is usually work for about 3 hours, the machine downtime and a half hours, let different parts of the machine is cooled down, join the fuel, lubricant, and the like.)


小型UV打印机,UV打印机厂家,手机壳打印机,墙体彩绘机厂家,uv平板喷绘机厂家
备案信息:粤ICP备18130081号-3
[email protected] 汉皇(广州)图像技术有限公司
www.tx-color.com